ACUITY 205F14 L7XLED T24 U

Recessed housing rated IC or Non-IC. For new construction only. Approved for all ceiling and wiring types. Approved for direct burial in insulation. Air-tight standard. Tested to meet current energy codes. Aluminum foam-gasketed housing with galvanized steel pan. Galvanized bar hangers span up to 24” o.c. and feature built in nailer and integral T-bar clips. Two locking screws hold fixture in position. Galvanized steel junction box with four built-in Romex clamps; five 1/2'' and two 3/4'' nominal knockouts with slots for pryout. Rated for through branch wiring. Maximum 4 (2 in, 2 out) No 12 AWG conductors. Rated for 90° C. Ground wire provided. Removable J-box doors for easy access. Trim retention (TOR): Two side-mounted torsion springs on the trim and 2 receiving brackets in the can ensure a consistently tight fit with the ceiling. Quick disconnect provided for power connection to the LED modules. Paint overspray masked by disposable disconnect plug. Housing and LED module combination is IC rated and thermally protected. 120 volts only. Air-tight housing suitable for air-tight installations. Refer to energy codes for proper installation. 2 x 8 wood joist or T-bar installation. Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings. Length of 25-1/4'' maximum 13-1/4'' minimum or cut to fit 9'' on center joist construction. Vertical adjustment of housing allows for flush mounting with ceiling face. Suitable to ceilings up to 1-1/2 thick. UL Listed to US and Canadian safety standards. Wet location listed, Title 24 compliant.